Chinese Electric Control Valve Manufacturer
  • Chinese Electric Control Valve Manufacturer

Válvula de control motorizada HVAC

Características:

Valve Body & Valve Cover WCB
Valve Seat & Valve Disc Copper Alloy
Seal Ring (O-Ring) Nitrile Rubber (NBR)
Valve Stem 2Cr13
Spring 50CrVA
DN 20-800
PN 1.0-2.5MPa
Tipo de conexión Brida
Fluid Temperature 0℃to 80℃
Detalles de producto
Válvula de control motorizada HVAC DN20-800 PN1.0-2.5MPa
Solicitud
The hydraulic control piping system consists of a main valve, solenoid pilot valve, needle valve, ball valve, micro-filter, and pressure gauge. Remote control of the valve's opening and closing can be achieved through the solenoid pilot valve. By adding auxiliary devices, the opening and closing speed can be controlled.
 
This product uses the pilot valve to control the opening and closing of the main valve, saving energy. It can replace large-scale electric actuators of other valves.
 
When water is supplied to the valve from the inlet end, the water flows through the needle valve into the main valve control chamber. When the solenoid pilot valve is opened, the water in the control chamber flows out through the solenoid pilot valve and ball valve. Since the opening degree of the ball valve is larger than that of the needle valve, the pressure in the main valve control chamber is very low, and the main valve is fully open.
 
When the solenoid pilot valve is closed, the water in the main valve control chamber cannot flow out. The pressure in the control chamber rises, pushing the diaphragm to close the main valve.
Embalaje y Entrega

Usamos empaques de orificio pasante y la válvula se envuelve en una bolsa de PP para garantizar la seguridad del producto en la mayor medida posible. Apoyamos el envío por mar y por aire, y los productos también se pueden enviar a cualquier puerto que especifique.

enviar mensaje ahora

Ventajas

SUSCRÍBETE A NUESTRO BOLETÍN