Aveugle aux lunettes
Caractéristiques:
The 8-shaped blind plate is a pipeline component mainly designed for easy maintenance. You can paint the upper half of the "8" in black to determine the specific shape. It's half a blind plate and half an iron ring. It is commonly used for pipeline flanges that need to change the process. The materials mainly include carbon steel, stainless steel, and alloy, which can be selected based on the pressure level and medium of the pipeline.
Used to isolate or connect piping systems. The 8-shaped blind plate is a steel plate with a fixed thickness that is divided into two discs. Two discs are connected by flat steel, one of which is a solid disc and the other is a hollow circular ring, with an inner diameter consistent with the flange.
Liste détaillée
Détails du produit
The 8-shaped blind plate is a combination of a solid circle and a hollow circle. When conveying fluid, the hollow circle is used, and when cutting off, the solid circle is used, similar to the function of a shut-off valve. It can be used to cut off when the valve leaks. Its sealing performance is relatively good.
Usually used on pipelines with larger diameters, one end of the flange is used to occupy the spacing to keep the pipeline unobstructed. If necessary, a blind plate with the same thickness at the other end is used to cut off the pipeline. Avoid forced expansion of pipelines due to temporary replacement of other blind plates, which may affect the entire system.
Combustible or toxic medium pipelines entering and exiting the device should be equipped with double gate valves, and an 8-shaped blind plate should be installed on the double gate valve. Such 8-shaped blind plates are generally marked as normally open.
When selecting an 8-shaped blind plate, attention should be paid to matching it with the flange used to clamp it. The length of the bolts used for clamping should be appropriately extended according to the thickness of the blind plate.
Application
For medium and high pressure equipment and pipelines that are connected to the open and closed drain for manual discharge, an 8-shaped blind plate is installed behind the shut-off valve.
At the interface reserved for later construction equipment or devices, an 8-shaped blind plate should be installed at the shut-off valve.The 8-shaped blind flange is commonly used for pipeline flanges that need to change the process. The materials mainly include carbon steel, stainless steel, and alloy, which can be selected based on the pressure level and medium of the pipeline
All pipelines connecting the factory air, instrument air, nitrogen, and gas supply pipelines to the LNG plant are equipped with valves and spectacle blinds, which are located between the shut-off valve and our device.
Emballage et livraison
Nous utilisons des caisses et des palettes en bois pour l'emballage, et les vannes sont emballées dans des sacs en plastique à bulles afin de garantir une protection optimale du produit. Nous proposons le transport maritime et pouvons également expédier les produits vers le port de votre choix.
Envoyer un message maintenant
Avantages
-
Fabricant
Tsunny Valves se concentre sur la conception et la production de vannes. L'entreprise dispose de 7 lignes de fonderie et de plus de 40 ateliers pour contrôler les processus de fonderie, d'usinage, d'assemblage et d'emballage.
-
Pourquoi nous
① Vente directe d'usine, prix compétitif ② Garantie de qualité – Test 100% avant vente ③ Livraison rapide sous 30 jours environ pour les commandes de 1 à 500 pièces
-
Nous pouvons réaliser des prestations OEM.
Nous possédons notre propre marque indépendante et sommes performants en production OEM. Nos produits sont conformes aux normes ANSI/API, DIN, JIS/KS, BS, NF et russes.







