집제품판막HVAC 밸브HVAC Motorized Control Valve
Chinese Electric Control Valve Manufacturer
  • Chinese Electric Control Valve Manufacturer

HVAC Motorized Control Valve

특징:

Valve Body & Valve Cover WCB
Valve Seat & Valve Disc Copper Alloy
Seal Ring (O-Ring) Nitrile Rubber (NBR)
Valve Stem 2Cr13
Spring 50CrVA
디엔 20-800
PN 1.0-2.5MPa
Connection Type 플랜지
Fluid Temperature 0℃to 80℃
문의 보내기 sales@tsunnyvalve.com
세부 정보 목록
제품 상세 정보
HVAC Motorized Control Valve DN20-800 PN1.0-2.5MPa
애플리케이션
The hydraulic control piping system consists of a main valve, solenoid pilot valve, needle valve, ball valve, micro-filter, and pressure gauge. Remote control of the valve's opening and closing can be achieved through the solenoid pilot valve. By adding auxiliary devices, the opening and closing speed can be controlled.
 
This product uses the pilot valve to control the opening and closing of the main valve, saving energy. It can replace large-scale electric actuators of other valves.
 
When water is supplied to the valve from the inlet end, the water flows through the needle valve into the main valve control chamber. When the solenoid pilot valve is opened, the water in the control chamber flows out through the solenoid pilot valve and ball valve. Since the opening degree of the ball valve is larger than that of the needle valve, the pressure in the main valve control chamber is very low, and the main valve is fully open.
 
When the solenoid pilot valve is closed, the water in the main valve control chamber cannot flow out. The pressure in the control chamber rises, pushing the diaphragm to close the main valve.
포장 및 배송

저희는 관통형 포장 방식을 사용하며, 밸브는 PP 백으로 포장하여 제품의 안전성을 최대한 보장합니다. 해상 운송과 항공 운송을 모두 지원하며, 고객님께서 지정하신 항구로도 배송 가능합니다.

지금 메시지 보내기

장점

관련 상품

뉴스레터 구독하기