BHQ 스트레이트 스트로크 - 상단 장착 핸드휠

제품 상세 정보

1. The cylinder body material is seamless steel pipe, which has been quenched and tempered to ensure the stability of the cylinder body. It is then processed and honed with a dedicated machine tool to ensure high accuracy

The shape and position tolerance of the cylinder block is adjusted to achieve a surface finish of 0.8. After conducting an air seal experiment, the inner cavity of the cylinder block is chrome plated for 5S, and the internal control is polished again.

The connection interface between the lower flange and the valve meets the requirements of GB/T12222 and GB/T12223 standards.

2. Coaxial installation, compact structure, compact size, suitable for high-pressure valves, old valves with heavy oil, and large-diameter valves, with superior cost-effectiveness.

Mechanical piston drive, continuous use for a long time,

Low failure rate, long service life, and energy-saving economy.

Enclose all working mechanisms in a shell made of hard chromium plated steel pipes, which can withstand high temperatures and flames for a long time. Built in with fault bit protection

The spring allows for easy opening of the valve to the set safety position.

애플리케이션

There are a wide range of power sources, and compressed air or nitrogen of 0.3-0.6Mpa in the power and petrochemical industries can be used as the driving force, suitable for

It is an explosion-proof and safe product in various flammable and explosive working environments.

Coaxial installation, compact structure, compact size, suitable for high-pressure valves, old valves with heavy oil, and large-diameter valves, with superior cost-effectiveness.

포장 및 배송

We use through-hole packaging, and the valve will be wrapped in a PP bag to ensure the safety of the product to the greatest extent. We support shipping by sea and by air, and the products can also be shipped to any port you specify.

지금 메시지 보내기

이름

이메일 *

메시지 *

提交时链接

来源

제출하다