목이 있는 플랫 용접 플랜지
특징:
The full name of flat welded flange with neck is flat welded steel pipe flange, which is a flange that extends steel pipes, fittings, etc. into the flange and connects it to equipment or pipelines through fillet welds. Flat welding flange refers to a type of flange that is connected to a container or pipeline using a fillet weld. It belongs to any type of flange, and there are two types of flange rings: with and without a neck. Flat welded flanges have a simple structure and are made with fewer materials, but their rigidity and sealing performance are not as good as those of plain flanges. They are widely used for connecting medium and low pressure vessels and pipelines
도움이 필요하신가요?필요한 답변을 쉽게 얻을 수 있는 방법을 알려드립니다.
- 공유하다:
제품 상세 정보
The neck height of the flat welded flange with a neck is relatively low, which improves the stiffness and load-bearing capacity of the flange. Compared with butt welded flanges, the welding workload is large, the consumption of welding rods is high, and it cannot withstand high temperature and pressure, repeated bending, and temperature fluctuations. However, on-site installation is more convenient, and the process of welding seam rubbing can be omitted.
The sealing surface forms include: raised face (RF), concave face (FM), raised face (M), tenon face (T), groove face (G), and full face (FF).
Diameter range: DN10~DN600.
Materials: carbon steel, chromium molybdenum steel, 304, 316, 304L, 316L, 321, 347, CF8C,etc.
Flat welding flanges with a neck are also classified as flat welding flanges because they have a short neck, which increases the strength of the flange and improves its load-bearing capacity. So it can be used on higher pressure pipelines.
The welding seam form between the neck flat welded flange pipe and the flange is a fillet weld. The material is machined from ordinary steel plates with a thickness that meets the requirements.
애플리케이션
Flat welded flanges are only suitable for pipeline systems with relatively low pressure levels and minimal pressure fluctuations, vibrations, and vibrations.
포장 및 배송
저희는 나무 상자와 팔레트를 사용하여 포장하며, 밸브는 최대한의 제품 안전을 위해 버블 필름 비닐 백으로 포장합니다. 해상 운송을 지원하며, 고객님께서 지정하신 항구로도 배송 가능합니다.
지금 메시지 보내기
장점
-
제조업체
Tsunny 밸브는 밸브 설계 및 생산에 중점을 두고 있습니다. 주조 라인 7개와 작업장 40개 이상을 갖추고 주조, 가공, 조립 및 포장 공정을 제어합니다.
-
왜 우리인가
①공장 직판, 경쟁력 있는 가격 ②품질 보증 – 판매 전 100% 테스트 ③1~500개 주문 시 약 30일 이내 빠른 배송
-
OEM도 가능합니다
자체 독립 브랜드를 보유하고 있으며 OEM 생산에 능숙합니다. 당사 제품에는 ANSI/API, DIN, JIS/KS, BS, NF, 러시아 표준이 포함됩니다.
